Linhong Walls Facory

Five Main Factors of Affecting The Quality of Lin Hong Wall

  • Sep 08, 2015

General use of all kinds of light wallboard, partition board to our building materials innovation and energy conservation, environmental protection has brought many benefits, but there is no denying that at the same time, because most of the wallboard production factory is small, the technology is immature, low management level, has caused some inferior products and cannot be used properly after installation. Lin Hong Technology Co.,LTD is is China first completely independent intellectual property rights and thoiredoxin magnesium building materials operators of seting reaearch,production,manufacturing,technology promotion and management as a whole.It is China Magnesite Association,one of the main drafting units”China Thioredoxin Magnesium Industry Standard”  The Company is located in southern economic development zone of Xibaipo,covering 150 acres,of which 60,000square meters of production workshop,laboratory building,office building 10,000 square meters and supporting staff living quarters and storage areas.Multiple independent designed fully enclosed run production lines,which all equipped with elextronic control system and automatic transmission systems with a total investment of 1 billion RMB,and during the productive process there is no “Three Wastes” emissions.

The influencing factors on the quality of the Lin Hong Wall mainly include the following:

1、 Selection of raw materials

Ratio of raw material composition, quality directly affects the quality of the products. According to technical requirements and characteristics of the product choose qualified raw materials, to improve the quality of raw materials to make the necessary testing before use or trial, and the proportion of test to determine the economic and reasonable.

2、 Production personnel technical level

Lin Hong Wall in the production and management of the technical level of determines the product quality and stability, Lin Hong Wall in the production process, there are many link need someone to hold and intervention, and therefore experience and sense of responsibility are often play a big role.

3、Production Equipment

Reliable, mature and stable technoligy is one of the important factors to ensure the quality of the product. The choose and buy of equipment should not only consider the cost, more important is the reliability of the production efficiency and operation and maintenance easy. Especially it is important to note that before purchasing the equipment must be carried out on the equipment necessary to run test, not only listen to the introduction of factory and buy blindly.

4、Curing Condition

Some companies ignore the maintenance link in finished product, make the product not appropriate temperature and humidity in storage to reduce the strength of wallboard, cracking or warp.

5、Construction Method

Construction scheme is reasonable, the operation method is properly will influence

  


Sales Center: 17th Floor, Gelan Building, Xisanzhuang Street, Shijiazhuang, Hebei, China
Copyrights © Hebei Linhong Technology Co., Ltd. All Rights Reserved       Technical Support: Reanod

Top
Linhong Walls Facory

Five Main Factors of Affecting The Quality of Lin Hong Wall

  • Jan 01, 1970

General use of all kinds of light wallboard, partition board to our building materials innovation and energy conservation, environmental protection has brought many benefits, but there is no denying that at the same time, because most of the wallboard production factory is small, the technology is immature, low management level, has caused some inferior products and cannot be used properly after installation. Lin Hong Technology Co.,LTD is is China first completely independent intellectual property rights and thoiredoxin magnesium building materials operators of seting reaearch,production,manufacturing,technology promotion and management as a whole.It is China Magnesite Association,one of the main drafting units”China Thioredoxin Magnesium Industry Standard”  The Company is located in southern economic development zone of Xibaipo,covering 150 acres,of which 60,000square meters of production workshop,laboratory building,office building 10,000 square meters and supporting staff living quarters and storage areas.Multiple independent designed fully enclosed run production lines,which all equipped with elextronic control system and automatic transmission systems with a total investment of 1 billion RMB,and during the productive process there is no “Three Wastes” emissions.

The influencing factors on the quality of the Lin Hong Wall mainly include the following:

1、 Selection of raw materials

Ratio of raw material composition, quality directly affects the quality of the products. According to technical requirements and characteristics of the product choose qualified raw materials, to improve the quality of raw materials to make the necessary testing before use or trial, and the proportion of test to determine the economic and reasonable.

2、 Production personnel technical level

Lin Hong Wall in the production and management of the technical level of determines the product quality and stability, Lin Hong Wall in the production process, there are many link need someone to hold and intervention, and therefore experience and sense of responsibility are often play a big role.

3、Production Equipment

Reliable, mature and stable technoligy is one of the important factors to ensure the quality of the product. The choose and buy of equipment should not only consider the cost, more important is the reliability of the production efficiency and operation and maintenance easy. Especially it is important to note that before purchasing the equipment must be carried out on the equipment necessary to run test, not only listen to the introduction of factory and buy blindly.

4、Curing Condition

Some companies ignore the maintenance link in finished product, make the product not appropriate temperature and humidity in storage to reduce the strength of wallboard, cracking or warp.

5、Construction Method

Construction scheme is reasonable, the operation method is properly will influence

  


Sales Center.: 17th Floor, Gelan Building, Xisanzhuang Street, Shijiazhuang, Hebei,China
Copyrights © Hebei Linhong Technology Co., Ltd. All Rights Reserved
Technical Support: Reanod

  • Links: solar charge controller piso flotante Clay Brick Machine Concrete 3D Panels steel bar cutting machine solar system battery Outdoor LED Panel glow in the dark power
  • Linhong Walls Facory

    Five Main Factors of Affecting The Quality of Lin Hong Wall

    • Jan 01, 1970

    General use of all kinds of light wallboard, partition board to our building materials innovation and energy conservation, environmental protection has brought many benefits, but there is no denying that at the same time, because most of the wallboard production factory is small, the technology is immature, low management level, has caused some inferior products and cannot be used properly after installation. Lin Hong Technology Co.,LTD is is China first completely independent intellectual property rights and thoiredoxin magnesium building materials operators of seting reaearch,production,manufacturing,technology promotion and management as a whole.It is China Magnesite Association,one of the main drafting units”China Thioredoxin Magnesium Industry Standard”  The Company is located in southern economic development zone of Xibaipo,covering 150 acres,of which 60,000square meters of production workshop,laboratory building,office building 10,000 square meters and supporting staff living quarters and storage areas.Multiple independent designed fully enclosed run production lines,which all equipped with elextronic control system and automatic transmission systems with a total investment of 1 billion RMB,and during the productive process there is no “Three Wastes” emissions.

    The influencing factors on the quality of the Lin Hong Wall mainly include the following:

    1、 Selection of raw materials

    Ratio of raw material composition, quality directly affects the quality of the products. According to technical requirements and characteristics of the product choose qualified raw materials, to improve the quality of raw materials to make the necessary testing before use or trial, and the proportion of test to determine the economic and reasonable.

    2、 Production personnel technical level

    Lin Hong Wall in the production and management of the technical level of determines the product quality and stability, Lin Hong Wall in the production process, there are many link need someone to hold and intervention, and therefore experience and sense of responsibility are often play a big role.

    3、Production Equipment

    Reliable, mature and stable technoligy is one of the important factors to ensure the quality of the product. The choose and buy of equipment should not only consider the cost, more important is the reliability of the production efficiency and operation and maintenance easy. Especially it is important to note that before purchasing the equipment must be carried out on the equipment necessary to run test, not only listen to the introduction of factory and buy blindly.

    4、Curing Condition

    Some companies ignore the maintenance link in finished product, make the product not appropriate temperature and humidity in storage to reduce the strength of wallboard, cracking or warp.

    5、Construction Method

    Construction scheme is reasonable, the operation method is properly will influence

      


    Copyrights © Hebei Linhong Technology Co., Ltd.
    All Rights Reserved
    Technical Support: Reanod