Linhong Walls Facory
Fireproof Panel
  • Fireproof Panel
  • Fireproof Panel
  • Fireproof Panel
  • Fireproof Panel
  • Fireproof Panel

Fireproof Panel

Fireproof Panel
  • Product Detail

Fireproof panel is the raw paper (titanium powder paper,kraft paper) through impregnation technology of the melamine and phenolic resin and high temperature and high pressure. After the melamine resin thermosetting molding,its surface high hardness,resistant to wear,temperature and impact,surface pore is thin and not esay polluted,resistant to solvent,water,drug,flame and other mechanical strength.Insulativity and arc resistance are good and not easy ageing.The surface of fireproof panel is gloss,and the lucency is also good which can restore colour and figure.


After the phenolic resin thermosetting molding it will form higher density which has the resistance to temperature,water and stereoplasm and other physical distributions.


Characteristics of fireproof Panel

1.Heat Insulation: The heat preservation and insulation is six times of the glass,three times of the clay,ten times of common concrete.

2.High strength and light weight: it is 1/4 of the common concreter,1/3 of the clay,lighter than water,cube crushing strength ≥4mpa,especially in the steel structure work adopt to fireproof panel can give play to its superiority of light weight,high strength,good tensility,strong shock resistance

3.Fire retardant:Aerated concrete is inorganic substance,not burning and it does not produce gases at the high temperature;at the same time ,the heat conductivity coefficient of aerated concrete is small that make the thermal migration get slow which can effectively reject fire and can protect its structure cannot get affected by the fire .

4.Convenient processing:it can be sawing,drilling,grinding,and nailed,and it is easy to reflect design idea.

5.Accoustic insulation :With different thickness can reduce 30-50 decibel noise;

6.To adapt to the bearing:wind load,snow load and dynamic load

7.Good durability:There is no ageing problem,and not easy to weathering,it is a kind of durable building material,their normal life can math with all kinds of the life of permanent structures.

8.Green and environmental:There is no radioactivity and hazardous substance

9.Economical and practical:It can increase the usable area,reduce foundation cost,cut down construction period,reduce central heating and the air-condition cost ,thus getting energy-saving effect.

10.Convenient construction: The size of aerated concrete product is accurate and the weight is light which can greatly reduce the manpower investment.


Advantages of Fireproof Panel

Bright color,various banding,with the resistance to wear,high temperature, cut and permeate ,east to clean,dampproof,fastness,feel fine,reasonable price and so on.


National Fireproof Construction Material Quality Supervision Inspection Center Test Results Summary Sheet

NumberInspection ItemTest MethodTechnical IndexInspection ResultConclusion
1Furnace Temperature Rise,  ℃GB/T5464-1999≤302Qualified
2Sustained Burning Time,5 hoursGB/T5464-199900Qualified
3Mass Loss Rate,%GB/T5464-1999≤50.036.2Qualified
4Heat Value,MJ/kgGB/T14402-1999≤2.00.2Qualified
5Smoke Toxicity,mg/lGB/T20285-2006≤100.0100.0Qualified

Sales Center: 17th Floor, Gelan Building, Xisanzhuang Street, Shijiazhuang, Hebei, China
Copyrights © Hebei Linhong Technology Co., Ltd. All Rights Reserved       Technical Support: Reanod

Top
Linhong Walls Facory
Fireproof Panel

Fireproof Panel

Fireproof Panel

  • Product Detail

Fireproof panel is the raw paper (titanium powder paper,kraft paper) through impregnation technology of the melamine and phenolic resin and high temperature and high pressure. After the melamine resin thermosetting molding,its surface high hardness,resistant to wear,temperature and impact,surface pore is thin and not esay polluted,resistant to solvent,water,drug,flame and other mechanical strength.Insulativity and arc resistance are good and not easy ageing.The surface of fireproof panel is gloss,and the lucency is also good which can restore colour and figure.


After the phenolic resin thermosetting molding it will form higher density which has the resistance to temperature,water and stereoplasm and other physical distributions.


Characteristics of fireproof Panel

1.Heat Insulation: The heat preservation and insulation is six times of the glass,three times of the clay,ten times of common concrete.

2.High strength and light weight: it is 1/4 of the common concreter,1/3 of the clay,lighter than water,cube crushing strength ≥4mpa,especially in the steel structure work adopt to fireproof panel can give play to its superiority of light weight,high strength,good tensility,strong shock resistance

3.Fire retardant:Aerated concrete is inorganic substance,not burning and it does not produce gases at the high temperature;at the same time ,the heat conductivity coefficient of aerated concrete is small that make the thermal migration get slow which can effectively reject fire and can protect its structure cannot get affected by the fire .

4.Convenient processing:it can be sawing,drilling,grinding,and nailed,and it is easy to reflect design idea.

5.Accoustic insulation :With different thickness can reduce 30-50 decibel noise;

6.To adapt to the bearing:wind load,snow load and dynamic load

7.Good durability:There is no ageing problem,and not easy to weathering,it is a kind of durable building material,their normal life can math with all kinds of the life of permanent structures.

8.Green and environmental:There is no radioactivity and hazardous substance

9.Economical and practical:It can increase the usable area,reduce foundation cost,cut down construction period,reduce central heating and the air-condition cost ,thus getting energy-saving effect.

10.Convenient construction: The size of aerated concrete product is accurate and the weight is light which can greatly reduce the manpower investment.


Advantages of Fireproof Panel

Bright color,various banding,with the resistance to wear,high temperature, cut and permeate ,east to clean,dampproof,fastness,feel fine,reasonable price and so on.


National Fireproof Construction Material Quality Supervision Inspection Center Test Results Summary Sheet

NumberInspection ItemTest MethodTechnical IndexInspection ResultConclusion
1Furnace Temperature Rise,  ℃GB/T5464-1999≤302Qualified
2Sustained Burning Time,5 hoursGB/T5464-199900Qualified
3Mass Loss Rate,%GB/T5464-1999≤50.036.2Qualified
4Heat Value,MJ/kgGB/T14402-1999≤2.00.2Qualified
5Smoke Toxicity,mg/lGB/T20285-2006≤100.0100.0Qualified

Sales Center.: 17th Floor, Gelan Building, Xisanzhuang Street, Shijiazhuang, Hebei,China
Copyrights © Hebei Linhong Technology Co., Ltd. All Rights Reserved
Technical Support: Reanod

  • Links: solar charge controller piso flotante Clay Brick Machine Concrete 3D Panels steel bar cutting machine solar system battery Outdoor LED Panel glow in the dark power
  • Linhong Walls Facory
    Fireproof Panel

    Fireproof Panel

    Fireproof Panel
    • Product Detail

    Fireproof panel is the raw paper (titanium powder paper,kraft paper) through impregnation technology of the melamine and phenolic resin and high temperature and high pressure. After the melamine resin thermosetting molding,its surface high hardness,resistant to wear,temperature and impact,surface pore is thin and not esay polluted,resistant to solvent,water,drug,flame and other mechanical strength.Insulativity and arc resistance are good and not easy ageing.The surface of fireproof panel is gloss,and the lucency is also good which can restore colour and figure.


    After the phenolic resin thermosetting molding it will form higher density which has the resistance to temperature,water and stereoplasm and other physical distributions.


    Characteristics of fireproof Panel

    1.Heat Insulation: The heat preservation and insulation is six times of the glass,three times of the clay,ten times of common concrete.

    2.High strength and light weight: it is 1/4 of the common concreter,1/3 of the clay,lighter than water,cube crushing strength ≥4mpa,especially in the steel structure work adopt to fireproof panel can give play to its superiority of light weight,high strength,good tensility,strong shock resistance

    3.Fire retardant:Aerated concrete is inorganic substance,not burning and it does not produce gases at the high temperature;at the same time ,the heat conductivity coefficient of aerated concrete is small that make the thermal migration get slow which can effectively reject fire and can protect its structure cannot get affected by the fire .

    4.Convenient processing:it can be sawing,drilling,grinding,and nailed,and it is easy to reflect design idea.

    5.Accoustic insulation :With different thickness can reduce 30-50 decibel noise;

    6.To adapt to the bearing:wind load,snow load and dynamic load

    7.Good durability:There is no ageing problem,and not easy to weathering,it is a kind of durable building material,their normal life can math with all kinds of the life of permanent structures.

    8.Green and environmental:There is no radioactivity and hazardous substance

    9.Economical and practical:It can increase the usable area,reduce foundation cost,cut down construction period,reduce central heating and the air-condition cost ,thus getting energy-saving effect.

    10.Convenient construction: The size of aerated concrete product is accurate and the weight is light which can greatly reduce the manpower investment.


    Advantages of Fireproof Panel

    Bright color,various banding,with the resistance to wear,high temperature, cut and permeate ,east to clean,dampproof,fastness,feel fine,reasonable price and so on.


    National Fireproof Construction Material Quality Supervision Inspection Center Test Results Summary Sheet

    NumberInspection ItemTest MethodTechnical IndexInspection ResultConclusion
    1Furnace Temperature Rise,  ℃GB/T5464-1999≤302Qualified
    2Sustained Burning Time,5 hoursGB/T5464-199900Qualified
    3Mass Loss Rate,%GB/T5464-1999≤50.036.2Qualified
    4Heat Value,MJ/kgGB/T14402-1999≤2.00.2Qualified
    5Smoke Toxicity,mg/lGB/T20285-2006≤100.0100.0Qualified


    Copyrights © Hebei Linhong Technology Co., Ltd.
    All Rights Reserved
    Technical Support: Reanod